Heliocentris Energy Manager 2.0, Instruction Manual

Page: 55 / 101

Operating
Menu item Display Description I/C
offline FCU module is offline and will
not be started by the EM
control software.
I
standby FCU is available I
error FCU module is in error status. I
OpMode 1 of the modes: Operation mode that indicates
the system answer to a user
command (CHANGE
OPMODE).
init Software module is initializing. I
run User request for Online.
Selected unit will switch to one
of the following operational
states:
-
Standby
-
Active
-
Error
I
offline User request for Offline.
Selected unit will switch to
Offline operational state. I
test User request for test.
Selected unit will switch to
Offline operational state. I
Change
OpMode 1 of the
commands: Operation mode that indicates
the system answer to a Change
OpMode user command .
no command No command is in the queue. I+C
go online Request for online operation
mode. Selected unit will switch
to online operation mode.
Can only be executed in offline
operation mode.
C
go offline Request for offline operation
mode. Selected unit will switch
to offline operation.
Can be executed in any
operation mode.
C
go testmode Request for test operation
mode.
Selected unit will switch to test
operation mode. Can only be
executed from offline mode. C
cancel command Cancels command in queue. C
Relay 1 of the
commands: Commands available when
unit is in test mode.
Relay on Switches on the FCU controller
reset relay manually. C
Relay off Switches off FCU controller C
Energy Manager 2.0 - Instruction Manual 55