Heliocentris Energy Manager 2.0, Instruction Manual

Page: 56 / 101

Operating
Menu item Display Description I/C
reset relay off manually.
Temp x.x °C Room temperature of FCU -
controlled shelter. I
Fanspeed xxx RPM Fan speed of FCU in volts. I
PWM x.x % Percentage of max value for
FCU only if controlled via
analog signal. I
Op-Time x.xx h Operating hours of FCU unit. I
Reset Counter* Resets operating counters. C*
Error List Number in
hexadecimal
format All active events are displayed
one after another with their
number and a short text, which
can be reviewed
I+C
Legend:
*
Item is only displayed if the access level is service
I/C Information / Command
Table 5-8 Free Cooling Unit submenu
5.1.9 Solar Submenu
Menu item Display Description I/C
OpState 1 of the states: Operational state of the solar
unit. The state is also displayed
in the main menu if no error
has occurred.
init Software module is initializing. I
offline Solar module is offline and will
not be started by the EM
control software.
active Solar module is active. I
standby Solar module is available. I
error Solar module is in error status. I
OpMode 1 of the modes: Operation mode that indicates
the system answer to a user
command (Change OpMode).
init Software module is initializing. I
offline User request for Online.
Selected unit will switch to
offline following operational
state.s I
run User request for Offline.
Selected unit will switch to one
of the following operational
states:
-
Standby
-
Active
-
Error.
I
56 Energy Manager 2.0 - Instruction Manual