5.5 Stop brake
5.5 Stop brake
Stop brake is an internal expanding and shoe type brake and is installed on the output
Stop brake is an internal expanding and shoe type brake and is installed on the output
end of one intermediary shaft at the rear side of the gearbox. (See No. 9 of Fig. 3.1) For
end of one intermediary shaft at the rear side of the gearbox. (See No. 9 of Fig. 3.1) For
detailed structure, See Fig. 5.12.
detailed structure, See Fig. 5.12.
The operation of stop brake is shown in Fig. 5.11. When the forklift is under the
The operation of stop brake is shown in Fig. 5.11. When the forklift is under the
standard loading state and stop brake is made on the slope, the manual operating force
standard loading state and stop brake is made on the slope, the manual operating force
should be not bigger than 300N. The pulling force is adjusted according to the direction
should be not bigger than 300N. The pulling force is adjusted according to the direction
shown in the Fig and B is the
shown in the Fig and B is the
force measu
force measu
rement point
rement point
.
.
Fig.5.11 Parking brake unit
Fig.5.11 Parking brake unit
Release position
Release position
Brake position
Brake position
Reduce
Reduce
Augment
Augment
Parking brake
Parking brake
-75-
-75-
https://www.besttruckmanuals.com/
