(2) Brief Explanation for operation
(2) Brief Explanation for operation
There is a starting protection circuit in the shiftlever the forklift truck. you have to
There is a starting protection circuit in the shiftlever the forklift truck. you have to
shift the shiftlever in neutral before you start the engine. Otherwise,you can not start the
shift the shiftlever in neutral before you start the engine. Otherwise,you can not start the
engine.
engine.
Turn the key switch anti-clockwise to the “
Turn the key switch anti-clockwise to the “
H”position (pre-heating position),th
H”position (pre-heating position),th
e
e
air of the engine is heated to benefit for starting. Turn the key switch clockwise to the
air of the engine is heated to benefit for starting. Turn the key switch clockwise to the
first“on”position,the instrument circuit and the ignition circuit are ready for work.
first“on”position,the instrument circuit and the ignition circuit are ready for work.
The key switch as follows:
The key switch as follows:
Fig.2-2 Key Switch
Fig.2-2 Key Switch
Turn the key switch clockwise to the second “on”position(starting position), then
Turn the key switch clockwise to the second “on”position(starting position), then
start the engine.
start the engine.
Release the brake switch before starting, Otherwise,the forklift truck can not step
Release the brake switch before starting, Otherwise,the forklift truck can not step
because the drive unit is cut off.
because the drive unit is cut off.
After engine starting,push the shiftlever forward(that is in forward shifts),then
After engine starting,push the shiftlever forward(that is in forward shifts),then
pedal accele
pedal accele
rator shift,the forklift truck runs faster and you can begin to work. When pull
rator shift,the forklift truck runs faster and you can begin to work. When pull
the shiftlever backward(that is in reverse shifts),the back lamp is on and the buzzer
the shiftlever backward(that is in reverse shifts),the back lamp is on and the buzzer
sounds.
sounds.
2.2 Lamp Switch
2.2 Lamp Switch
2.2.1 Turn the lamp switch clockwise to the first “on” position ,the front lamps and
2.2.1 Turn the lamp switch clockwise to the first “on” position ,the front lamps and
rear lamps are on , turn the lamp switch to the second “on”position , the headlight on
rear lamps are on , turn the lamp switch to the second “on”position , the headlight on
near beam are on while the front lam
near beam are on while the front lam
ps and rear lamps keep on.
ps and rear lamps keep on.
2.2
2.2
.2
.2
Pus
Pus
h
h
the
the
tur
tur
nin
nin
g
g
swi
swi
tch
tch
bac
bac
kwa
kwa
rd,
rd,
the
the
lef
lef
t
t
tur
tur
nin
nin
g
g
lam
lam
ps
ps
on
on
the
the
fro
fro
nt
nt
combination lamp and the rear combination lamp
combination lamp and the rear combination lamp
flash,Pull the turning switch forward,
flash,Pull the turning switch forward,
the right turning lamps on the front combinatio
the right turning lamps on the front combinatio
n lamp and the
n lamp and the
rear combina
rear combina
tion lamp flash.
tion lamp flash.
2.2.
2.2.
3 Brake Signal
3 Brake Signal
:
:
When you pedal brak
When you pedal brak
e ,
e ,
the brake lamp
the brake lamp
s
s
(
(
red
red
)
)
in the rear
in the rear
combination lamp are on.
combination lamp are on.
2.1 Starting
2.1 Starting
-29-
-29-
https://www.besttruckmanuals.com/