2.2.4 Reverse signal：When you need to reverse the forklift truck ,pull the shiftlever
2.2.4 Reverse signal：When you need to reverse the forklift truck ,pull the shiftlever
backward and the transmission is in reverse shift. Then the reverse lamps (white) in the
backward and the transmission is in reverse shift. Then the reverse lamps (white) in the
rear combinat
rear combinat
ion lamps are on and
ion lamps are on and
the buzzer sounds.
the buzzer sounds.
2.2.5 Charging Signal：Befo
2.2.5 Charging Signal：Befo
re you start the
re you start the
engine, put the key switch to
engine, put the key switch to
the first “
the first “
on”position and the charging lamp is on. After engine starting, the charging lamp is
on”position and the charging lamp is on. After engine starting, the charging lamp is
automatically off. If the charging lamp becomes on while the engine is working , it means
automatically off. If the charging lamp becomes on while the engine is working , it means
somet
somet
hing is wrong
hing is wrong
with the charging circui
with the charging circui
t and
t and
you must stop working and check the
you must stop working and check the
charging circuit as soon as possible.
charging circuit as soon as possible.
2.2.6 Oil Pressure Signal：Before you start the engine, put the key switch to the
2.2.6 Oil Pressure Signal：Before you start the engine, put the key switch to the
first“on”position and the oil pressure alarm lamp is on，After engine starting, the oil
first“on”position and the oil pressure alarm lamp is on，After engine starting, the oil
pressure alarm lamp is automatically off. If this lamp becomes on while the engine is
pressure alarm lamp is automatically off. If this lamp becomes on while the engine is
working , it indicate
working , it indicate
s low lubricating oil pres
s low lubricating oil pres
sure and you must stop working and check the
sure and you must stop working and check the
lubricating system as soon as possible.
lubricating system as soon as possible.
2.2.7 Water deposit(water and oil segregator)indicator：Before you start the engine,
2.2.7 Water deposit(water and oil segregator)indicator：Before you start the engine,
put the key switch to the first“ on” position and the water deposit(water and oil
put the key switch to the first“ on” position and the water deposit(water and oil
segregator)indicator is on , the alarm lamp is automatically off, if the lamp becomes on
segregator)indicator is on , the alarm lamp is automatically off, if the lamp becomes on
while the engine is working , it indicates water in the water deposit is over the alarming
while the engine is working , it indicates water in the water deposit is over the alarming
level of water, and you must drain off the water, and than the alarm lamp is automatically
level of water, and you must drain off the water, and than the alarm lamp is automatically
off.
off.
2.2.8 Fuel meter：It indicates how much fuel is left in tank.
2.2.8 Fuel meter：It indicates how much fuel is left in tank.
2.2.9 Water Temperature Meter：It indicates the temperature of the engine coolant.
2.2.9 Water Temperature Meter：It indicates the temperature of the engine coolant.
2.2.10 Hour Meter：It indicates how many hours the engine has work
2.2.10 Hour Meter：It indicates how many hours the engine has work
ed .
ed .
Fig.2.3-1 H2000 type combination meter
Fig.2.3-1 H2000 type combination meter
1.Fuel meter
1.Fuel meter
2.Water temp. meter
2.Water temp. meter
3.Hour meter 4
3.Hour meter 4
.Air cleaner ind
.Air cleaner ind
icator
icator
5.indicator
5.indicator
6.Charging indicator 7.Oil pressure indicator 8 Water temp. indicator
6.Charging indicator 7.Oil pressure indicator 8 Water temp. indicator
-30-
-30-
https://www.besttruckmanuals.com/
