5.4.2 Travel brake (8-10t forklif
5.4.2 Travel brake (8-10t forklif
t truck) (See Fig. 5.9)
t truck) (See Fig. 5.9)
There are two brake sub- pumps for travel brake of 8-10t forklift. The upper and
There are two brake sub- pumps for travel brake of 8-10t forklift. The upper and
lower ones contact with two ends of primary and secondary braking shoes and the
lower ones contact with two ends of primary and secondary braking shoes and the
clearan
clearan
ce adjuster is next to the
ce adjuster is next to the
brake sub-pump.
brake sub-pump.
When the clearance is
When the clearance is
adjus
adjus
ted, remove the
ted, remove the
rubbe
rubbe
r
r
cover install
cover install
ed at
ed at
the adjuster
the adjuster
location on the bottom plate of the brake and the tooth of the adjuster is rotated from inside
location on the bottom plate of the brake and the tooth of the adjuster is rotated from inside
to outside with screwdriver until the friction disc contacts with the inner wall of braking
to outside with screwdriver until the friction disc contacts with the inner wall of braking
drum. Then the tooth of the adjuster is back rota
drum. Then the tooth of the adjuster is back rota
ted about 5 or 6 splines. (See Fig. 5.10)
ted about 5 or 6 splines. (See Fig. 5.10)
8-10t forklift adopts dynamic braking and the material used for leather bowl of brake
8-10t forklift adopts dynamic braking and the material used for leather bowl of brake
sub-pump is oil-resistant rubber. More attention should be paid in the replacement.
sub-pump is oil-resistant rubber. More attention should be paid in the replacement.
Fig.5.10
Fig.5.10
Rubber cap
Rubber cap
Expand
Expand
-74-
-74-
https://www.besttruckmanuals.com/