Heinner HMB-42A+, Instruction Manual, Page: 34 / 88

shape the warmed door seal
by hand such that it sits
correctly.
Unusual noises. Appliance is not level. Readjust the feet.
The appliance is touching the wall
or other objects. Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall. If necessary, carefully bend
the component out of the way.
The compressor does not
start immediately after
changing the temperature
setting. This is normal, no error has
occurred. The compressor starts after a
period of time.
Water on the floor or storage
shelves. Check that the Drip tray is housed
properly.
Drip tray is full of water See the
³
cleaning and care
´
section.
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Clicks:
- Whenever the compressor switches on or off, a click can be heard.
Humming:
- As soon as the compressor is in operation, you can hear it humming.
Bubbling:
- When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Splashing:
- Even after the compressor has been switched off, this noise can be heard for a short
time.
5HJXODWLRQV6WDQGDUGV*XLGHOLQHV
This appliance is in accordance with the following EU guidelines:
-73/23/EEC low voltage guidelines.
-89/336/EEC EMC Directive
-
2009/125/EC
framework for the setting of ecodesign requirements for energy-using
- EC.643/2009. requirements for household refrigerating appliances.
ZZZKHLQQHUFRP
7 18