Heinner HMB-42A+, Instruction Manual, Page: 29 / 88

ķ
Ŀ
ľ
Ľ
ļ
Ļ
ĺ
Ĺ
ĸ
1. Remove the upper hinge cap (1).
2. Using a sharp object, pry out the plug buttons(5).
3. Remove the two Phillips screws(2) that connect the upper hinge(3) on the right side of the
cabinet top.
4. Carefully lift the door and place it on a padded surface to prevent it from scratching.
5. Remove the plug(9) and transfer it to the uncovered hole at the right side. Be sure to press
the button firmly into the hole.Remove the two bolts(7) that hold the lower hinge(4) on
the right side.
6. Remove the screw-type leveling front leg(8) and transfer it to the right side as shown in
the figure below.
7. Set the door into it's new place making sure the pin enters the bushing at the lower frame
section(hole).
8. Secure the upper hinge(3) previously removed in step 3 on the left side. Make sure the pin
enters the bushing at the upper frame section(hole).
9. Loosely secure the lower left hinge(4) and do not tighten the bolts until the door is in the
closed position and leveled.
10. Insert the plug buttons(5) on the uncovered holes(right side).
11. Replace the upper hinge cap(1).
ZZZKHLQQHUFRP
12 18