Heinner HMB-42A+, Instruction Manual, Page: 30 / 88

Warning!
When changing the side at which the door opens, the appliance must not be connected to the
mains. Remove plug from the mains beforehand.
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth contact.
The temperature selector knob is located on the side of the freezer compartment.
Setting 0 means:
Turning the temperature control to "0" position stops the cooling cycle, but does not shut off
the power to the refrigerator.
Turning clockwise in direction Refrigerating unit on, the latter then operating automatically. If
the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the refrigerator will not
start.
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you select setting of 3 or 4, if you want the temperature warmer or colder
please turn the knob to lower or higher setting accordingly.
When you turn the knob to lower which can lead to the more energy efficiency. Otherwise, it
would result the energy-consuming.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature
regulator (position 6 to 7) can cause the compressor to run continuously or even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to
maintain the low temperature in the appliance.
Interior accessories
IMPORTANT!-
In order to take full advantage of the storage volume ,the user can store
waterproof foodstuffs on the Drip Tray, such as packed food with heat sealing, etc. But during
the process of manual defrosting, the user had better take the foodstuffs away from the drip
tray.
ZZZKHLQQHUFRP
13 18