Heinner HBH-V4IWFSCIX, Manual

Page: 38 / 89

www.heinner.com
37
Electrical Connection and Safety
WARNING: The electrical connection of this appliance should be carried out by
an authorised service person or qualified electrician, according to the instructions in
this guide and in compliance with the current local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED.
•
Before connecting the appliance to the power supply, the voltage rating of the
appliance (stamped on the appliance identification plate) must be checked for
correspondence to the available mains supply voltage, and the mains electric wiring
shoul
d be capable of handling the appliance’s power rating (also indicated on the
identification plate).
uring installation, please ensure that isolated cables are used. An incorrect
connection could damage your appliance. If the mains cable is damaged and needs
to be replaced this should be done by a qualified personnel.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
The supply cord should be kept away from hot parts of the appliance and must
not be bent or compressed. Otherwise the cord may be damaged, causing a short
circuit.
•
If the appliance is not connected to the mains with a plug, a all-pole
disconnector (with at least 3 mm contact spacing) must be used in order to meet the
safety regulations.
•
The appliance is designed for a power supply of 220-240 V~. If your supply is
different, contact the authorized service personnel or qualified electrician.
•
The power cable (H05VV-F) must be of sufficent length to be connected to the
appliance.
•
The fused switch must be easily accessible once the appliance has been
installed.
•
Ensure all connections are adequately tightened.
•
Fix the supply cable in the cable clamp and then close the cover.
•
The terminal box connection is placed on the terminal box.