Heinner HBH-V4IWFSCIX, Manual

Page: 35 / 89

www.heinner.com
34
•
Keep the hose clear of sharp corners and objects that could move.
•
Before you assemble the connection, you must make sure the hose is not
damaged. Use bubbly water or leakage fluids to perform the check. Do not use a
naked flame to check for gas leakage.
•
All metal items that are used during gas connection must be free from rust.
Check the expiry date of any components used for connection.
Points that must be checked during fixed gas connection assembly:
The method used to assemble a fixed gas connection (gas connection made by
threads, e.g. a nut) varies according to the country you are in. The most common
parts for your country will be supplied with your appliance. Any other parts required
can be supplied as spare parts.
During connection, always keep the nut on the gas manifold fixed while rotating the
counter-part. Use appropriately-sized spanners for a safe connection. For surfaces
between different components always use the seals provided in the gas conversion
kit.
The seals used during connection should also be approved to be used in gas
connections. Do not use plumbing seals for gas connections.
Remember that this appliance is ready to be connected to the gas supply in the
country for which it has been produced.
The main country of destination is marked on the rear cover of the appliance. If you
need to use it in another country, any of the connections in the figure below may be
required. In such a case, contact local authorities to learn the correct gas
connection.
The Cooker must be installed and maintained by a suitably qualified gas registered
technician in accordance with current safety legislation.
WARNING : Do not use a naked flame to check for gas leaks.