Heinner HBH-V4IWFSCIX, Manual

Page: 34 / 89

www.heinner.com
33
•
Insert the appliance into the aperture and fix in position using the brackets
( A ) and screws ( B ). Adjust the position of the brackets depending on the thickness
of the worktop and tighten the screws evenly. Carefully trim away any excess
sealing material ( C ) from around the appliance.
Gas Connection
Assembly of gas supply and leakage check
Connect the appliance in accordance with applicable local and international
standards and regulations. First, check what type of gas is installed on the cooker.
This information is available on a sticker on the back of the cooker. You can find the
information related to appropriate gas types and appropriate gas injectors in the
technical data table. Check that the feeding gas pressure matches the values on the
technical data table, to be able to get the most efficient use and to ensure the
minimum gas consumption. If the pressure of used gas is different than the values
stated or is not stable in your area, it may be necessary to assemble an available
pressure regulator on the gas inlet. You should contact the authorised service centre
to make these adjustments.
Points that must be checked during flexible hose assembly :
•
If the gas connection is made by a flexible hose fixed onto the gas inlet of the
hob, it must be fixed on by a pipe collar.
•
Connect your appliance with a short and durable hose that is as close as
possible to the gas source.
•
The permitted maximum length of the hose is 1.5 m.
•
The device should be connected in line with the relevant local gas standards.
•
The hose must be kept clear of areas that may heat up to temperatures of more
than 90°C.
•
The hose must not be cracked, torn, bent or folded.