Heinner HBH-V4IWFSCIX, Manual

Page: 28 / 89

www.heinner.com
27
•
Before connecting your appliance, make sure that the local distribution conditions
(nature of the gas and gas pressure or electricity voltage and frequency) and the
specifications of the appliance are compatible. The specifications for this appliance
are stated on the label.
CAUTION: This appliance is designed only for cooking food and is intended
for indoor domestic household use only. It should not be used for any other
purpose or in any other application, such as for non-domestic use, in a
commercial environment or for heating a room.
•
This appliance is not connected to a ventilation device. It shall be installed and
connected in accordance with current installation regulations. Particular attention
should be given to the relevant requirements regarding ventilation.
•
If the burner has not lit after 15 seconds, stop operating the device and open the
compartment door. Wait at least 1 minute before attempting to ignite the burner again.
•
These instructions are only valid if the correct country symbol appears on the
appliance. If the symbol does not appear on the appliance, refer to the technical
instructions which describe how to modify the appliance to match the conditions of use
of the country.
•
All possible measures have been taken to ensure your safety. Since the glass
may break, care should be taken when cleaning. Avoid hitting or knocking the glass
with accessories.
•
Make sure that the supply cord is not trapped or damaged during installation. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to prevent a hazard.
If your appliance is provided with a cooking hotplate made of glass or glass ceramic:
CAUTIO
N: “In case of hotplate glass breakage”: immediately shut off all burners
and any electrical heating elements and isolate the appliance from the power supply,
do not touch the appliance surface, do not use the appliance.
1.2 Installation warnings
•
Do not operate the appliance before it is fully installed.
•
The appliance must be installed by an authorised technician. The manufacturer is
not responsible for any damage that might be caused by incorrect placement and
installation by unauthorised people.
•
When the appliance is unpacked, make sure that it is has not been damaged
during transportation. In the case of defect, do not use the appliance and contact a
qualified service agent immediately. The materials used for packaging (nylon, staplers,
styrofoam, etc.) may be harmful to children and they should be collected and removed
immediately.
•
Protect your appliance from the atmosphere. Do not expose it to sun, rain, snow,
dust or excessive humidity.
•
Materials around the appliance (i.e. cabinets) must be able to withstand a
minimum temperature of 100°C.
•
The appliance must not be installed behind a decorative door, in order to avoid
overheating.