Heidolph 506-21100-00, Operating Instructions Manual

Page: 47 / 65

48
Operation
Operation
General notes
Observe the instructions in this section when operating the device!
CAUTION
Risk of injury, risk of damage to property due to tilting/fall-
ing of the device
High shaking frequencies in combination with a large load and/or
a tall attachment assembly on the shaking platform may cause the
device to swing up and fall!
➜ Only gradually increase the shaking frequency to the required
level under the above conditions, paying attention to the
stability of the structure.
➜ Lower the shaking frequency or reduce the total load on
the shaking platform when the device starts to move during
operation.
An uneven distribution of the load on the shaking platform may
cause the device to swing up and fall!
➜ Always ensure that the vessels are evenly distributed on the
shaking platform.
➜ Pay particular attention to an even distribution of the weight
load when vessels of different sizes and/or differently filled
vessels are placed on the shaking platform at the same time!
Risk of injury, risk of damage to property from falling ves-
sels
At high shaking frequencies, there is a risk that improperly fastened
vessels will fall off the shaking platform.
➜ Before switching on the device, make sure that all vessels are
properly fixed on the shaking platform.
➜ Contaminated surfaces should be cleaned immediately.
Always place individual vessels in the center of the heating plate.
Use suitable attachments for processing multiple samples/vessels
simultaneously.
Do not switch on the appliance until all the vessels are securely
positioned on the heating plate.
Always use the necessary and appropriate personal protective
equipment!