46
Commissioning
Automatic restart
If the [automatic restart] function is activated, the device switches on again automati-
cally with the set parameters after a power interruption when the power is restored.
WARNING
Risk of burns, risk of injury, risk of damage to property from
falling vessels and leaking chemicals
When the [automatic restart] function is activated, the heating
plate automatically heats up to the last set operating tempera-
ture when the power is restored and the rotation speed will be
augmented to the last set value.
➜
Ensure that all vessels are properly positioned on the heating
plate before the power is restored.
➜
In the event of a power failure, do not place any objects on the
heating plate.
By default, the [automatic restart] function is deactivated. The function can be acti-
vated or deactivated at any time via the device settings:
➜
Open device settings (see section „Open the settings menu“, page 45)
➜
Set
AR
to
on
to activate the function
➜
Set
AR
to
off
to disable the function
Soft start
When the [soft start] function is activated, the speed is gradually increased to the set
value after the rotation is switched on.
By default, the [soft start] function is activated. The function can be activated or deacti-
vated at any time via the device settings:
➜
Open device settings (see section „Open the settings menu“, page 45)
➜
Set
SoS
to
off
to disable the function
➜
Set
SoS
to
on
to enable the function
Auto standby function
When the [auto standby] function is activated, the device is automatically switched off
from idle status (no heating function, no agitation function) if no operation is performed
for a period of three minutes.
The device must then be switched on again using the on/off button.
By default, the [auto standby] function is deactivated. The function can be activated or
deactivated at any time via the device settings:
➜
Open device settings (see section „Open the settings menu“, page 45)
➜
Set
ASd
to
on
to activate the function
➜
Set
ASd
to
off
to disable the function
Summary of Contents for 506-21100-00
