TNC 426/TNC 425/TNC 415 B/TNC 407
2 - 1 6
2
Manual Operation and Setup
NO
ENT
.
.
.
ENT
e.g.
END
0
Setting the Datum with a 3D Touch Probe
Select the second coordinate.
DATUM
Enter the second coordinate of the datum (for example, in the Y axis).
Terminate the probing function.
If you do
not wish to use the points that were already probed for a basic rotation:
TOUCH POINTS OF BASIC ROTATION?
Ignore the previous touch point coordinates.
Probe both workpiece sides twice each.
Enter the coordinates of the datum.
