manualshive.com logo in svg

HEIDENHAIN TNC 407, User Manual

Share
Download
HEIDENHAIN TNC 407 User Manual Download Page 60

TNC 426/TNC 425/TNC 415 B/TNC 407

1 - 4 2

1

Introduction

To copy a file:

➤

Call the file manager with PGM NAME.

➤

Move the highlight to the file you wish to copy.

➤

Press the COPY soft key.

➤

Type the new file name into the highlight in the screen headline.

➤

Press ENT to copy the file. The original file is retained.

➤

Close the file manager with END.

To erase a file:

➤

Press CL PGM.

➤

Move the highlight to the file you wish to delete.

➤

Press the DELETE soft key to erase the highlighted file.

➤

Close the file manager with END.

To rename a file:

➤

Call the file manager with PGM NAME.

➤

Move the highlight to the file you wish to rename.

➤

Shift the soft-key row.

➤

Press the RENAME soft key and type the new file name into the
highlight in the screen headline.

➤

Press ENT to rename the file. The original file name is erased.

➤

Close the file manager with END.

To protect a file:

➤

Call the file manager with PGM NAME.

➤

Move the highlight to the file you wish to protect.

➤

Shift the soft-key row.

➤

Press the PROTECT soft key. The file now has status P and cannot be
accidentally changed or erased.

➤

Close the file manager with END.

To cancel file protection:

➤

Call the file manager with PGM MGT.

➤

Move the highlight to the file whose protection you wish to remove.

➤

Shift the soft-key row.

➤

Press the UNPROTECT soft key.

➤

Type the code number 86357 and confirm with ENT. File protection is
canceled, the file no longer has status P.

➤

Close the file manager with END.

1.6

File Management on the TNC 425, TNC 415 B and TNC 407

Summary of Contents for TNC 407














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands