TNC 426/TNC 425/TNC 415 B/TNC 407
1 - 3 6
1
Introduction
PGM
MGT
Selecting file types
Call the file manager.
List the file types.
Show all files, or ...
show only one type, for example HEIDENHAIN conversational programs
(file type .H).
File Management on the TNC 426
To copy individual files:
You must be in the PROGRAMMING AND EDITING mode of operation.
➤
Call the file manager with PGM MGT.
➤
Select the directory containing the file you wish to copy. Move the
highlight to the desired file.
➤
Press the COPY soft key.
➤
Type the new file name into the highlight in the screen headline.
➤
Press the ENT key or the EXECUTE soft key to copy the file into the
active directory. The original file is retained.
➤
Close the file manager with END.
• If you are copying tables, you can overwrite individual lines or columns in the target table with the REPLACE
FIELDS soft key. Prerequisites:
– The target table must exist.
– The file to be copied must only contain the columns (or lines) you want to replace.
• You can also copy an entire directory together with its subdirectories. Simply place the highlight on the directory
you wish to copy and press the COPY DIR soft key. Then proceed as described above in the section “To copy
individual files”.
