HEIDELBERG PG.010.000B, User Manual, Page: 45 / 116

Operation
Suprasetter 145/162/190 – User’s Guide 45
Unloading the Plates on a Manual Device
After imaging, the plate lies on the insertion table ready for removal.
Note: You will hear a beep approx. 3 seconds before an imaged plate
appears. In addition, the middle LEDs flash synchronously.
When the plate is output, you will hear a brief beep again, indicating
that the plate can now be removed.
1. Put on protective gloves.
2. Remove the printing plate from the Suprasetter for further processing.
Caution
Risk of injury from improper handling
Plate edges can be sharp. Put on protective gloves. This will
protect you from injury.
Notice
Never handle printing plates on your own. Two persons are
always required to transport printing plates so that they do
not buckle or bend during loading and unloading.
i
i