HEIDELBERG PG.010.000B, User Manual, Page: 39 / 116

Operation
Suprasetter 145/162/190 – User’s Guide 39
Quick Shutdown with the On/Off button on the
Suprasetter.
A quick shutdown is not possible after you trigger the shutdown sequence if the
Suprasetter is currently running an error correction (can take several minutes).
However, you can force a quick shutdown by triggering the shutdown sequence
again.
1. Press and hold down the On/Off button (approx. 3 seconds) until you
hear a beep.
2. Release the On/Off button.
3. Press the On/Off button a second time.
Now repeat shutdown:
4. Press and hold down the On/Off button (approx. 3 seconds) until you
hear a beep.
5. Release the On/Off button.
6. Press the On/Off button a second time.
The Suprasetter interrupts error correction and shuts down.
Note: In this case as well, you must repeat shutdown if the beep sounds
for a second time before you have done step 3 or 6.
i
i