HEIDELBERG PG.010.000B, User Manual, Page: 29 / 116

Notes on Installation
Suprasetter 145/162/190 – User’s Guide 29
Notes on Installation
Notes on Installation
Transport of the Suprasetter 145/162/190
The Suprasetter 145/162/190 is to be transported solely by companies that are
authorized by Heidelberg to do so. Transport may be done only by qualified
persons. The appropriate transport regulations must be observed during trans-
port..
Installation of the Suprasetter
The Suprasetter may be installed only by authorized service personnel. The
ambient conditions must be observed.
• Because the installation site must have clean conditions, the Suprasetter
may not be operated in sites where paper is being printed or paper finish-
ing devices are running.
• The floor at the installation site must be even and firm.
• Make sure that the device is installed at a sufficient distance from walls
and other objects to ensure adequate ventilation and proper servicing.
(for minimum distances, see the drawings in the installation instructions)
• The Suprasetter should not be installed near air-conditioning equipment
and must be protected from humidity and direct sunlight.
Note: Initial installation is performed by service personnel. This
includes lifting the unit off the palette and removing the transport safe-
guards.
i
i