HEIDELBERG PG.010.000B, User Manual, Page: 10 / 116

Before you start ...
10 Version 2019
Qualification of the Users
After installation, users will be instructed in the operation and service and
maintenance of the Suprasetter by Heidelberg service personnel. Further
instruction, for example, for new staff employed subsequently, must be
ensured by the operator of the Suprasetter.
General
The Suprasetter may be installed only by authorized service personnel. The
ambient conditions must be observed.
For the operating company of a print shop, it is important that the exposure
limits regarding the breathable air in the work area, where the Suprasetter is
located, are adhered to. The air exchange must be arranged in such a way that
the measured dust particles are regularly below the exposure limit values. In
accordance with the state of the art, this can be achieved with an 8 to 10 air
change rate per hour. If this is not the case at the installation site, the operat-
ing company should install an additional exhaust system.
Servicing work may only be performed by authorized specialist person-
nel. The relevant accident prevention regulations must be observed at
all times.
Warning
Risk of fatal injury from unauthorized opening of the
device
Unauthorized opening of any parts of the casing not specifi-
cally referred to in the operating manual and inexpert repairs
can lead to considerable danger for the user.