4.3.4 Assembly of the Camera with Control Unit and the Laptop/PC
Parts:
Camera
head
Control
unit
PC interface cable
Halogen lamp (spare)
Foot
switch
FireWire
cable
50°
lens
Take out all parts and remove the packaging material.
Fasten the camera head to the camera support on the base by
placing the head on the two retention pins.
Guide the camera cable through the appropriate openings
into the cable duct of the table and from there to the back of
the control unit.
Remove the control unit from the box and the plastic
packaging and place the unit on the table.
Place the laptop plate on the power unit.
Place the laptop on the plate.
HRC Installation Instructions Vers. 001
21
