4.3
Assembly Instructions
4.3.1 Drill Holes for Basis with Joystick
Before assembly, holes must be drilled into the table plate (see diagram below for
measurements in cm).
4.3.2 Assembly of the base
Parts:
2x gear rail with 2 Phillips screws each
2x protective cover
1x white friction surface with 4 Phillips screws
1 base with joystick
1x camera support with Allen screw
1 guide rail with 2 gears, Allen screws and washers
1x protective hood for the device
Open the cardboard box. Take out the individual parts of
the base.
Mount the camera support to the basis with the joystick
using the Allen screw.
HRC Installation Instructions Vers. 001
16
