hecht 1641, Instructions For Use Manual

Page: 21 / 40

21 / 40
PL
SK
DE
EN
CS
HU
RESIDUAL RISKS
Even if the product is used according to instructions, it´s impossible to eliminate all the risks
associated with its operation. The following risks may occur arising from product construction:
• Electrical hazard caused by touch with parts under high voltage (direct contact) or with
parts, which came under a high voltage due to failure of the product (indirect contact).
• Heat hazard resulting in burning or scalding and other injuries caused by possible contact
with high temperature objects or materials including heat sources.
• Dangers caused by failing in ergonomic principles by construction of the product, for
example dangers caused by unhealthy position of body or excessive overcharge and unnature
to the anatomy of the human hand-arm, relate to construction of handle, equilibrium of
the product.
• Dangers caused by unexpected starting, unexpected exceeding of engine revs caused by
defect / failure of control system, relate to the defects by the handle and placing of drivers.
• Dangers caused by impossibility to stop the product in best conditions, relate to solidity of
the handle and placing of engine shut down product.
• Dangers caused by defect of product control system, relate to solidity of the handle, placing
of drivers and marking.
• Dangers caused by shooting up of subjects or splashing of liquids.
• Mechanical hazard, caused by cut and throw off.
• Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss
of balance, loss of consciousness).
• Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for
example so called “white finger disease”).
WARNING!
B
The product produces an electromagnetic field of a very weak intensity. This field may
interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons
with pacemakers should consult the use with their physician and the manufacturer.
ELECTRICAL SAFETY
• The basic safety precautions should always be followed while in use, including the following,
in order to reduce the risk of fire, electric shock and injury to persons.
WARNING!
B
Do not connect a damaged cable or touch the damaged cable before disconnecting
from the network. This can cause an electric shock. In case of damage to the supply,
have it replaced by an authorized service centre. This prevents a dangerous situation.
WARNING!
B
Keep track of where you have an extension cable. Damage of the extension cord
or cables may result in serious electrical shock, and in a better case only material
damage may occur.