10
8.0 SPARE PARTS
The following comprehensive list of spare parts are available for your SuperChill
water chiller. Please refer to the Rating Label on the side of your water chiller
before ordering to ensure the correct spare part is obtained.
DO NOT REPLACE WITH PARTS NOT RECOMMENDED BY HEATRAE
SADIA - THIS WILL INVALIDATE YOUR GUARANTEE AND MAY RENDER
THE INSTALLATION DANGEROUS.
DESCRIPTION
CODE NO.
Counter mounting push button spout assembly .....95 604 671
Motorised fan ..............................................................95 607 905
8mm “push fit” elbow ................................................95 607 908
Thermostat ..................................................................95 612 714
Electrical cable with moulded plug ...........................95 612 679
Agitator pump ............................................................95 607 906
Pressure reducing valve .............................................95 605 024
PE Tube 8x6 .................................................................95 607 907
PE Tube 6x4 .................................................................95 607 247
6 x 1/8 bsp “push fit” connector ...............................95 607 326
9.0 USER INSTRUCTIONS
9.1 The SuperChill water chiller cools and stores water at the temperature set
on the adjustable thermostat. This can be set to give temperatures in the
range of 4 to 12°C. To avoid any risk of freezing when the water chiller is
not in use for long periods during the winter months, set the thermostat
to a higher position.
9.2 If the SuperChill water chiller is fitted with an in-line filter that will
remove tastes, odours and particles from the water supply, the cartridge
will require periodic replacement to remain effective. This period will
depend on the water usage, however a period of six to twelve months is
recommended. Replacement of the filter cartridge by competent personnel
is recommended. Only replace the filter cartridge with one of the same
design.
9.3 Chilled water is dispensed by pressing the chromed push button on the
front of the outlet spout. Water from the spout should be dispensed into
suitable cups, jugs or carafes. (refer to paragraph 5.7 for flow adjustment
instructions)
9.4 A cup dispenser is available as an accessory, code 95 970 127. This can
dispense standard plastic or paper cups with a rim diameter of between
70 and 85mm.
9.5 To ensure the SuperChill water chiller continues to operate at its optimum
performance it should be periodically maintained in accordance with the
instructions given under the Sections headed 6.0 MAINTENANCE.
