8
device is suspended 1.2m above the ground.
• Do not try to repair the infrared heating element, the power cable cannot be replaced and
must always be returned to the manufacturer for repairs.
BEFORE INITIAL START-UP
Read the safety instructions and the manual before use! Check the infrared heating element
for visible damage and whether the main voltage is in accordance with the voltage information
on the type plate (verso). If you notice damages on the element, do not use it – contact your
specialist dealer.
We recommend that you not throw away the original package of the device. Store the original
package for possible transport.
START-UP
Install the infrared heating element with the delivered assembly kit and connect with the main cable!
ASSEMBLY
For the assembly please use the included drilling template with instruction.
ELECTRICAL CONNECTION
The infrared heating element is provided with a main plug. After having finished the assem-
bly, connect to a 230 Volt, 50Hz socket. Room temperature controller can be included in
the system by adapter plugs (socket thermostat) or in case of a fixed connection, consult an
installation specialist to install a control – taking into account the appropriate standards and
norms of the country concerned.
CLEANING AND CARE
Before cleaning, always disconnect the main power plug. To clean you should use a smooth
and damp cloth and a little dish detergent. Never clean the infrared heating element and the
power supply cables under running water, nor submerse in water. Do not use harsh, abrasive
or easily inflammable detergents.
EC – DECLARATION OF CONFORMITY
We declare that this device is in conformity with the regulation
DISPOSAL
The infrared heating element has to be disposed separately from general household
waste at government places provided for this purpose. You can obtain detailed infor-
mation for disposal at the specialist dealer where the product was purchased.
EN60335-1
EN60335-20
EN50366
Serial-Number
Size in cm
(a × b)
Power
(c)
Voltage
Frequency Temperature
Weight
VCIR
(30–60) × (60–120) 220–1000W 220–240V 50/60 Hz
80–125C°
3–10kg
Model/Type Reference: VCIR-a-b-c-d
d= C, P or blank. „C“ = ceiling mount only. „P“ = front surface is canvas, glass or mirror.
bedienungsanleitung_2017_RZ.indd 8
29.03.17 15:15
