Heatmiser PRT-ETS WiFi, Operating Instructions Manual

Page: 27 / 32

25
Feature Table
Feature Description Setting
01 Temperature Format 00=°C 01=°F
02 Switching 0.5=0.5°C - 3.0=3°C
Differential 1.0°C = Default
03 Frost Protect 00 = Disabled 01=Enabled
(01=Default)
04 Frost Temp 07-17°C (12=Default)
05 Output Delay Enter value
00-15 minutes (00=Default)
06 Comms Number Not available on this model
07 Temp Limit 00 – 10°C
08 Sensor Selection 00 = Built in sensor Only
01 = Remote Air Sensor Only
02 = Floor Sensor Only
03 = Built in sensor &
Floor sensor
04 = Remote air sensor &
Floor sensor