Heatmiser PRT-ETS WiFi, Operating Instructions Manual

Page: 15 / 32

Step 2
Place the thermostat front half somewhere safe.
Terminate the thermostat as shown in the diagrams at the
back of this booklet.
Screw the thermostat back plate on to the back box.
Step 3
Re-connect the two parts of the thermostat.
Connecting to the Thermostat from your
Web Browser
To connect to your thermostat, open your preferred browser
and enter the IP address that you gave the thermostat
during setup and press enter. You will now be asked for a
password and username, these are both “admin” as default.
We recommend you change these settings to ensure the
security of your system.
For further information, click the help link within the browser.
13