Heatmiser PRT-ETS WiFi, Operating Instructions Manual

Page: 25 / 32

03 = Floor sensor and built in air sensor. In this mode, the
thermostat will maintain the set temperature by monitoring
the built in air sensor and will also ensure the floor surface
doesn’t overheat by monitoring the remote floor sensor.
04 = Floor sensor and remote air sensor. In this mode, the
thermostat will maintain the set temperature by monitoring
the remote air sensor and will also ensure the floor surface
doesn’t overheat by monitoring the remote floor sensor.
Feature 09 – Floor Limit Temperature: This function allows
you to set a maximum floor temperature in order to protect
the floor surface from overheating. This function works for
Sensor Modes 03 & 04 (see above) The default setting is
28°C but this can be adjusted from 20-45°C.
Feature 10 – Optimum Start:
Optimum start will bring the
heating on early if needed, so the house is warm when you
wake up. This means you don’t need to allow any extra
heat up time when programming the comfort levels. The
thermostat will automatically learn the required heat up time
and will adjust itself, if required, throughout the year.
23