Heatmiser PRT-ETS WiFi, Operating Instructions Manual

Page: 24 / 32

Feature 05 – Output Delay:
To prevent rapid switching, an
output delay can be entered. This can be set from 00-15
minutes. The default is 00 which means there is no delay.
Feature 06 – Not used on this model.
Feature 07 – Temperature Up/Down Limit:
This function
allows you to limit the use of the up and down temperature
arrow keys. This limit is also applicable when the thermostat
is locked and so allows you to give others limited control
over the heating system.
Feature 08 – Sensor Selection: This thermostat offers 5
sensor modes.
00 = Built in air sensor. In this mode, the thermostat will
maintain the set temperature by monitoring the built in air
sensor.
01 = Remote air sensor. In this mode, the thermostat will
maintain the set temperature by monitoring the remote air
sensor.
02 = Floor sensor. In this mode, the thermostat will
maintain the set temperature by monitoring the remote floor
temperature.
22