0$,17(1$1&(6725$*(
DO NOT touch or move heater for
at least 45 minutes after use. Allow
all burner elements to cool before
touching.
FOR YOUR SAFETY ;
WARNING:
127(
In a salt-air environment (such as
near an ocean). corrosion occurs
more quickly than normal.
Frequently check for corroded
areas and repair them promptly.
127(
wait until heater is cool before
covering.
&/($1,1*$1'0$,17(1$1&(
To enjoy years of outstanding performance from your
heater make sure you perform the following maintenance
activities on a regular basis:
Keep exterior surfaces clean.
Use warm soapy water for cleaning. Never use
flammable of corrosive cleaning agents.
While washing your unit, be sure to keep the area
around the burner and pilot assembly dry at all times. If
the gas control is exposed to water in any way, do NOT
try to use it. It must be replaced.
Keep the appliance area free and clean from combustible
materials, gasoline and other flammable vapors and
liquids; not obstructing the flow of combustion and
ventilation air; keeping the ventilation opening(s) of the
cylinder enclosure free and clear from debris.
Gas odor with extreme yellow tipping of flame.
Heater does NOT reach the desired temperature.
Heater glow is excessively uneven.
Heater makes popping noises.
Visually checking burner flames.
Cleaning the appliance, including special surfaces, with
recommended cleaning agents, if necessary.
Lubrication of moving parts and the type and amount of
lubricant to be used.
When applicable, visually checking portions of the hose
assembly located within the confines of the heater post.
Check if there are cracks or worn sections on hose. If
yes, please call our customer service to replace hose.
$WOHDVWRQFHD\HDUWKHXQLWVKRXOGEHLQVSHFWHG
for
the presence of spiders, spider webs or other insects.
Air flow must be unobstructed. Keep controls, burner,
and circulating air passageways clean. Signs of possible
blockage include:
Check the cracks or worn sections
20
Summary of Contents for SRPH98
Page 6: ...3 2 9...