:$51,1*6$1'&$87,216
This heater is designed to operate with a standard 20 Ib propane cylinder with Approved Cylinder
Connection.
127(3/($6(5($'7+()2//2:,1*6$)(7<58/(6
722/61(('('
Adjustable open end wrench (NOT INCLUDED)
Philips screwdriver
Estimated time for assembly: 30 minutes.
35(3$5$7,21
Before beginning assembly of product, make sure all parts are present. If any part is missing or
damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Every part of the heater shall be secure against displacement and shall be constructed to maintain
a fixed relationship between essential parts under normal and reasonalbe conditions of handling and
usage. Parts not permanently secured shall be designed so they cannot be incorrectly assembled
and cannot be improperly located or misaligned in removing or replacing during cleaning or other
servicing.
Perform a leak test with a soapy solution:
1. To check gas connections.
2. After connecting a new cylinder.
3. Upon re-assembly after disassembly.
5
This product can expose you to chemicals including Lead and Lead Compounds, which are
known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead
Compounds which are known to the state of California to cause birth defects or other
reproductive harm. For more information go to www.P65Warnings.ca.gov
WARNING
Summary of Contents for SRPH98
Page 6: ...3 2 9...
