background image

21(<($5/,0,7(':$55$17<

23

The appliance has been manufactured under the highest standards of quality and workmanship. We 
warrant to the original consumer purchaser that all aspects of this product will be free of defects in 
material and workmanship for one (1) year from the date of purchase. A replacement for any defective 
part will be supplied free of charge for installation by the consumer. Defects or damage caused by the 
use of other than genuine parts are not covered by this warranty. This warranty shall be effective from 
the date of purchase as shown in the purchaser’s receipt. 

This warranty is valid for the original consumer purchaser only and excludes industrial, commercial or 
business use of the product, product damage due to shipment or failure which results from alteration, 
product abuse, or product misuse, whether performed by a contractor, service company, or consumer. 
We will not be responsible for labor charges and/or damage incurred in installation, repair or replace-
ment, nor for incidental or consequential damage.

SHINERICH INDUSTRIAL LTD.
Addr.: 8/F, Noble Center, 1006 Fuzhong 3rd. Rd,
Futian Distrct, Shenzhen, China

Need help?

call our toll free number at:

1-888-909-3888 or

e-mail us at:

[email protected]

Summary of Contents for SRPH98
























Reviews: