09-02
19
30532 Rev D
NASIM REAR DIRECT VENT DECORATIVE GAS APPLIANCE
Step 11. Attaching Labels
The installer conversion label and valve
manufacturer labels must be completed and
installed by the individual completing the
conversion.
This must be finished or the
conversion is not complete.
See Figures 34
through 38.
To fill out the installer conversion label, follow the
example in Figure 36. After filling out the label, clean
an area near the existing rating label and attach.
Attach the valve manufacturer conversion labels as
indicated in Figures 37 and 38.
Figure 36
Conversion Label (example)
THIS CONTROL
HAS BEEN
CONVERTED TO
LP
Figure 37
Robertshaw Conversion Label
Figure 38
Robertshaw Conversion Label Placement
Figure 35
Standing Pilot Valve Manometer Adjustment
CKP
THIS PLATE MUST BE AFFIXED AS CLOSE AS
POSSIBLE TO THE EXISTING RATING PLATE
.
THE FOLLOWING MUST BE COMPLETED BY THE
INDIVIDUAL CONVERTING THIS APPLIANCE FROM
PROPANE GAS TO NATURAL GAS.
This appliance has been converted on (date)
MO-DAY-YEAR
to
propane with Kit * CKP by (name and address of organization making
this conversion)
JOHN SMITH DISTRIBUTING, 1234
ANYWHERE RD., ANYWHERE, STATE/PROVINCE .
who accepts the responsibility for the correctness of this
conversion.
20836A
All manuals and user guides at all-guides.com