14
4034-102 Rev F
02/04
HRV200PLUS INSTALLATION INSTRUCTIONS
b. Attaching the CoolVent to the Fresh Air Fireplace Flue Collar
1)
Secure a CoolVent appliance connector to the CoolVent insulated flexible pipe per the manufacturers instructions.
2)
Apply a generous bead (1/2 inch) of RTV high temperature silicone to the flue collar and attach the appliance adaptor.
c. Assembling the Vent Pipe Sections
1)
When it is necessary to connect two or more lengths of CoolVent insulated flexible pipe in a vent run, use a universal
connector at each joint.
2)
Always support CoolVent insulated flexible pipe every three feet.
WARNING!
The maximum TOTAL EXHAUST vent run is measured from the flue collar of the Fresh Air Fire-
place, through the HRV, to the outside termination. DO NOT EXCEED MAXIMUM VENTING LENGTHS!
3. Fresh Air Fireplace Exhaust
- Stale air/combustion products from the FAF to the HRV
Duct Materials:
CoolVent Flexible Pipe (1 air clearance to combustible materials)
Firestops, Hangers and Accessories as Required
a. Fresh Air Fireplace Exhaust Guidelines
1)
FAF must be vented with CoolVent flexible insulated vent pipe, maintaining 1 (25.4mm) clearance to combustible
surfaces.
WARNING!
When vent sections exceed three feet (.9m) in length ensure minimum clearances are
maintained. Structural support must be provided to reduce off-center loading. Follow
manufacturer installation instructions..
Note:
1” (25.4mm) air clearance to combustibles must be maintained
when using CoolVent™ in this portion of the venting system.
2)
The total combined length of the CoolVent run for the Fireplace Exhaust
and
the HRV Exhaust must not exceed the
maximum lengths shown in the following table:
3)
Direction of flow may include any combination horizontal, vertical up or vertical down.
4)
The entire vent run must be contained within an area which will not experience temperatures below 40°F.
)UHVK$LU)LUHSODFH
0D[LPXP7RWDO/HQJWK 0D[LPXP7RWDO(OERZV
&DOLEHU1;73OXV3/86
)HHW
(OERZV
1RYXV3OXV3/86
)HHW
(OERZV
0$;,0809(17,1*/(1*7+6
Æ
Æ
All manuals and user guides at all-guides.com
