Heath Zenith SL-5309 Owner'S Manual Download Page 4

4

595-5496-07

TROUBLESHOOTING GUIDE

SYMPTOM
Light will not come 
on.

Light  comes  on  in 
daylight.

Light  comes  on  for 
no apparent reason.

POSSIBLE CAUSE

1.  The halogen lamp is positioned too 

close to the light control’s sensor 
or  pointed  at  nearby  objects  that 
cause  heat  to  trigger  the  sensor. 
(Reposition  the  lamp  away  from 
the sensor or nearby objects.)

2.  Light  control’s  sensor  is  pointed 

toward  a  heat  source  like  an  air 
vent, dryer vent, or brightly-painted 
heat-reflective surface. (Reposition 
sensor.)

3.  LIght  control  is  in  Manual  Mode. 

(Switch to Auto.)

1.  Heat or light from the halogen lamp 

may be turning the light control on 
and off. (Reposition the lamp away 
from the sensor.)

2.  Heat  being  reflected  from  other 

objects may be affecting the light 
control. (Re-aim sensor).

3.  Light control is in the TEST mode 

and warming up. (Flashing is normal 
under these conditions.)

SYMPTOM
Light  stays  on 
continuously.

Light flashes on 
and off.

POSSIBLE CAUSE

1.  Light switch is turned off.
2.  Halogen lamp is loose or burned 

out.

3.  Fuse is blown or circuit breaker 

is turned off.

4.  Daylight  turn-off  is  in  effect. 

(Recheck after dark.) 

5.  Incorrect circuit wiring, if this is 

a new installation.

6.  Not aimed correctly. (Re-aim the 

sensor to cover desired area.)

1.  Light control may be installed in 

a relatively dark location.

2.  Light control is in TEST. (Select 1, 

5 or 10 minutes for AUTO time.)

1.  Light  control’s  sensor  may  be 

detecting small animals, sway-
ing trees, or automobile traffic. 
(Re-aim sensor.)

2.  Sensitivity is set too high. (Re-

duce sensitivity.)

TECHNICAL SERvICE

Please call 1-800-858-8501 (English speaking only) for assistance before returning 

product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: 

www.hzsupport.com.

 

If the problem persists, call* for assistance at 

1-800-858-8501

 (English speaking only)

,

 7:30 AM to 4:30 PM CST 

(M-F). You may also write* to:
HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available: Model Number, Date of Pur-
chase, and Place of Purchase.

No Service Parts Available for this Product

ONE YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province 
to province.
For a period of one year from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected 
at no charge to you.

Not Covered -

 Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expend-

able items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will 
void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, 
unauthorized service, or return shipping charges.
This warranty covers only HeathCo LLC assembled products and is not extended to other equipment and components that a customer 
uses in conjunction with our products.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, 
REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PUR-
POSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE 
PART OF HEATHCO LLC FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT 
LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow 
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please 
keep your dated sales receipt, it is required for all warranty requests.

Summary of Contents for SL-5309













Reviews: