14
CHAPTER THREE
Troubleshooting Chart
Problem
Probable Cause
Remedy
“LO BAT” appears on the LCD
Weak batteries
Charge or replace battery
pack
ODORATOR 2 not recognized by a
PC.
Swap USB cable, RMA
Blower will not turn.
RMA
ERROR appears on the LCD.
Check setup, RMA
ERR50 appears on the LCD during
startup.
Direct Sunlight may affect
the sensor during startup.
Try turning ‘On’ the instrument
with lid half open or in shade.
LCD will not zero with gas supply line
attached to the ODORATOR 2
Metering valve open or
instrument problem
Close metering valve, RMA
Odor always detected
Contaminated sample hose
or flow system
Change tubing, RMA
The RMA process may be found on page 18 of this manual.
Parts List
The following list specifies ODORATOR 2 parts and accessories that are available from the
factory or regional offices.
HPN 104175
ODORATOR 2, complete
104147
Operato
r’s manual, ODORATOR 2
104189
OdorSeer / OdorSeer Remote manual, ODORATOR 2
22112110
Tubing (available in various lengths), Tygon
104145
Quick-connect, male with barb
103607-0
Label, “Warning” ODORATOR 2
0716725
Regulator, external, low pressure, 250 PSI max.
0111004
Regulator, external, high pressure, 3000 PSI max.
0104146
CD, ODORATOR 2
101311-0
Battery pack, 11.1V, 4.8 Ah
104155
Power Supply, standalone
104288
Mesh bag, ODORATOR 2
102458-0
Inverter, DC to AC, 150W
