2
Please keep these instructions for future reference.
Equipment assembly and Wiring is required before using this Guide.
For assembly please consult Intelligen Assebly and Wiring Guide.
PRIOR ASSEMBLY NEEDED
IMPORTANT!
This Quick Start Guide is
only for Intelligen Series XXKSJFS Model.
IMPORTANT!
Since product improvement is a continuing effort, we reserve the
right to make changes in specifications without notice.
Normal Business Hours – 8:00 AM – 8:00 PM EDT
(800) 321-1881
After Hours (after 5:00 PM EDT, weekends and holidays)
(877) 482-7238
heatcraft.com/intelligen/support
US. Customer Service
Normal Business Hours – 8:00 AM – 8:00 PM EDT
(800) 321-1881
After Hours (after 5:00 PM EDT, weekends and holidays)
(877) 482-7238
heatcraft.com/intelligen/support
Canada Customer Service
QUICK START GUIDE
INTELLIGEN 00049DFS
MARCH 2018*
*REPLACES JANUARY 2018
PART NO. 099483
iWC- intelliGen WEBSERVER CARD
Installation
•
While system is powered down, align and insert iWC's pins into intelliGen Refrigeration Controller
(iRC) board’s plug
•
Secure with mounting screws. Use #6-32x1 inch stainless steel machine screws.
•
Connect CAT5 Ethernet cable to iWC
•
Connect other end of Ethernet cable to a network router
STEP 1.
Enter Expert PIN
First digit in PIN automatically flashes
for edit. Turn dial to change first PIN
digit 0-9. Push Enter to choose digit.
Repeat with all digits.
The Default Expert PIN is 999999
ENTER EXPERT PIN
X X X X X X
Configuration and Initial Setup
Local Access
IF SYSTEM
HAS NOT
BEEN PREVIOUSLY CONFIGURED
•
Follow steps in intelliGen Quick Start Guide to configure system via iRCUI on an evaporator OR
following the next steps
•
Connect iWC to a network point/router before beginning webserver configuration
•
Follow steps to obtain IP address:
STEP 1
Enter Expert PIN