48
Heat & Glo •
TRUE-36, TRUE-42, TRUE-50 • 2282-900 Rev. i •
4/13
Figure 13.5. Splatter Guard Installation
B. Splatter Guard
The splatter guard is a piece of corrugated material
used to protect the appliance during the installation
process before
fi
nishing work on the whole hearth is
complete. Splatter guards may be factory installed or
accompany the door of the appliance, depending on
the model. Splatter guards must be removed before
appliance is
fi
red.
WARNING! Risk of Fire!
Close the ball valve before in-
stalling the splatter guard to prevent accidental lighting.
Remove the splatter guard before lighting the appliance.
1. Fold top
fl
ap along scored lines.
2. Slide side tabs into slots by sides of glass.
Figure 13.4 Finishing Templates Bends