16
Attach Corner Braces to Headers with four 2-1/2" screws as shown.
Pre-drill Post Assembly 1/4" x 2" DEEP and attach with fasteners as
shown
(Fig. B)
.
Measure and mark side headers as shown.
CORNER BRACE ATTACHMENT
FINISH
4
3
2
Spread glue on portion of Corner Brace that will connect to Headers
(Fig. A)
.
Check all parts are square and level. Ensure diagonal measurements are equal.
Fig. A
Fig. B
=
HANDY HINT:
Plan ahead for Rafter install by marking
both Headers now.
Glue
Mark
Lock Washer
Flat Washer
4-1/2" Lag Bolt
1-3/8" x 5-3/8" x 33"
(3,5 x 13,7 x 83,8 cm)
24" (61 cm)
24" (61 cm)
22-3/8" (56,8 cm)
22-3/8" (56,8 cm)
22-3/8" (56,8 cm)
22-3/8" (56,8 cm)
24" (61 cm)
24" (61 cm)
24" (61 cm)
24" (61 cm)
24" (61 cm)
24" (61 cm)
2-1/2" (6,3 cm)
Screw
1
BEGIN
3/8" Flat Washer
3/8" Lock Washer
3/8" x 4 1/2" Lag Bolt (11,4 cm)
PARTS REQUIRED:
x4
x4
x4
1/4" (0,6 cm)
Drill Bit
x8
1-3/8 x 5-3/8 x 33" (3,5 x 13,7 x 83,8 cm)
x16
2-1/2" (6,4 cm)
Pre-drill for
Lag Bolt
