Heartland PASADENA PAVILION 10x12 Page 3 Assembly Manual Download

Page: 3 / 34

10/18/2011

KEEP THIS MANUAL FOR FUTURE REFERENCE

ASSEMBLY MANUAL

PASADENA PAVILION 10' x 12' (304,8 x 365,8 cm)

16713

BEFORE YOU BEGIN

IMPORTANT!

READ INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING ASSEMBLY.

- CUSTOMER SERVICE -

Call: 1-800-577-9663 email: [email protected]

• BUILDING RESTRICTIONS AND APPROVALS

Be sure to check with local building department and homeowners association for speci c restrictions and/ or requirements before building.

• ENGINEERED DRAWINGS

Contact our Customer Service Team if engineered drawings are needed to pull local permits.

• SURFACE PREPARATION

To ensure proper assembly you must build your pavilion on a level surface.

• CHECK ALL PARTS

Inventory all parts listed on pages 3. Contact our Customer Service Team if any parts are missing or damaged.

• LEVELING AND ANCHORING

You may choose to anchor your pavilion. See page 6 for optional methods of leveling and anchoring your pavilion.

A Backyard Products Company

Summary of Contents for PASADENA PAVILION 10x12



































Search results

Summary of Contents for PASADENA PAVILION 10x12

Reviews:

Related manuals for PASADENA PAVILION 10x12

Brands by name

Popular brands

Heartland PASADENA PAVILION 10x12, Assembly Manual

Search results

Summary of Contents for PASADENA PAVILION 10x12

Reviews:

Related manuals for PASADENA PAVILION 10x12

Brands by name

Popular brands