18
Place Ridge Beam ush to Center Braces
(Fig. A)
, and tack in place with
temporary 2-1/2" screw from Center Brace into each end of Ridge Beam.
Use 1/4" x 3" Lag bolts, Washers, and Lock Washers to attach Ridge Beam
using pilot holes.
Remove temporary screws.
Repeat attachment process with Center Brace in back.
RIDGE BEAM INSTALLATION
PARTS REQUIRED:
2
3
Drill 3/16" x 2" DEEP pilot holes into Ridge Beam through four holes at top of
Center Brace as guides.
1
BEGIN
x8
x8
x8
x2
2-1/2" (6,4 cm)
Beam Flush
1/4" x 3" Lag Bolt (7,6 cm)
1/4" Flat Washer
1/4" Lock Washer
Step 1
Step 1
3" Lag Bolt
1/4" Flat Washer
1/4" Lock Washer
Fig. A
2-1/2" (6,4 cm)
Screws
FINISH
4
