HearthStone
Quality Home Heating Products Inc
®
Bennington Model 8350
14
I
NSTALLING
I
N
A M
OBILE
H
OME
Follow these special requirements for installing your
stove in a mobile home.
•
Install the stove in accordance with 24 CFR, Part
3280 (HUD)
•
Permanently attach the stove to your mobile home’s
floor. Use 1/4" holes in each leg base to bolt down
the stove.
•
Install one of the following Dura-Vent Mobile Home
Chimney & Connector Kits:
6DP-MH 6” Diameter S/N 9096N
7DP-MH 7” Diameter S/N 9196N
8DP-MH 8” Diameter S/N 9296N
Each kit includes:
Stainless spark arrester cap, storm collar,
Adjustable vented flashing – 0/12 – 6/12,
Two 24” Dura/Plus* chimney pipes, 24”
support box with built-in starter section and
trim.
* (UL or ULC approved equipment is acceptable)
•
Chimney must be removed when transporting Mobile
Home.
¦
WARNING:
DO NOT INSTALL IN A SLEEPING ROOM
¦
CAUTION:
MAINTAIN THE STRUCTURAL INTEGRITY OF
THE MOBILE HOME
WALLS, FLOOR,
CEILING, AND ROOF WHILE YOUR STOVE IS
INSTALLED AND IN USE
.
Adjustable Roof
Flashing
Storm Collar
Chimney Cap
Chimney is supported by Ceiling.
Starter section
with built-in
Support Box
Typical Mobile Home Installation.
Stovepipe
Chimney Section
