12
0
100
Vacuum
VP1000-5 with Vacuum Gauge Installed for A / B Sheet Testing
Note:
VP1000-5 is shown from a side view with natural piping slope. Outlet piping slope may be tilted away provided all
other applicable tests pass as described in the associated Executive Order.
Appendix A
VP1000-5 Installation and Testing
The figure below shows a vacuum gauge face with the acceptable vacuum level highlighted when measured with a
VP1000-5 vacuum pump. The acceptable vacuum level from the VP1000-5 is between 60 and 90” WC. Readings of + / - 3”
WC due to gauge accuracy or needle movement should be considered normal operation. This indicates that the VP1000-
5 is operating appropriately. If the vacuum level is below 60” WC or greater than 90” WC this would indicate some type of
issue with this particular pump, dispenser, or hanging hardware.
Acceptable Vacuum Level (Inches WC)
Summary of Contents for VP1000-5
Page 19: ...19 2012 FFS 405291001 Rev2...