6
V. Assembly Instructions
5.1 Install Caster Wheels
The following procedure is for Standard Application of the unit, whereby purified
air is vented through the Base Plate and recirculated within the facility.
For Outside Vent Applications, in which filtered air is vented out of the facility,
skip Section 5.1 and refer to the wheel installation instructions in Section 5.4.
5.1.1 Place the unit on its side on a flat surface, as shown in Fig. 1.
5.1.2 Locate the four (4) Caster Wheels and the Screwdriver that are provided
in Carton 1.
5.1.3 Unscrew and remove the screws that are pre-mounted onto the Base
Plate, on the bottom of the unit. There are four (4) screws per wheel, for a
total of sixteen (16) screws.
5.1.4 Align the holes of the Caster Wheel Mount with the holes on the Base
Plate, and use four (4) screws to securely mount each Caster Wheel to
the Base Plate one by one.
Fig. (1)
– Caster Wheel Installation
Base Plate
(16) Screws for
mounting wheels
