18
VII. Filter Replacement
7.3 Filter Change Indicator Light Reset
Once the filter has been replaced and the unit is powered on, the Filter Change
indicator light may continue to flash. To reset the filter change timer and
deactivate the flashing light, go through the following reset procedure:
7.3.1 Unplug the Power Cord from the Power Socket, wait a couple seconds
and plug the Power Cord back into the Power Socket.
7.3.2 Press and hold down the Power Button [
] on the Control Panel (not
the Remote Control) for five (5) seconds.
7.3.3 After five (5) seconds has passed, release the Power Button. The filter
change timer will have reset to 400-hours and the Filter Change
indicator light will have stopped flashing now.
Fig. (11) Filter Change Indicator Light Reset
Filter Change
indicator light
flashing
Press and Hold
Power button for
5 seconds
