14
VI. Operation Guidelines
6.1 Source Capture System Positioning
Place the HealthyAir
®
Source Capture Fan-Filter Exhauster System in the
desired location and place the Acoustic Mat below the unit to dampen the sound.
Once the unit is in place, adjust the Flex Hose to position the Hood
approximately 6” from the source of the particulate and fumes.
6.2 Source Capture System Activation
6.2.1
Plug the Power Cord into the Power Socket, located on the bottom of
the side panel of the unit, and then plug the other end of the cord into a
wall power socket.
Once plugged in, the Power indicator light [
]
will turn on and
display a red light.
6.2.2
Activate the unit by pressing the Power button located on the Control
Panel, shown in Fig. 6, or on the Remote Control.
Once the unit is powered, the motor will start with the Fan Speed set to
the Mid-Speed.
6.3 Source Capture System Controls
Each of the respective control elements shown on the Control Panel Display in
Fig. 6 work as follows:
SPEED
button, on Control Panel and Remote control, adjusts the
volume of airflow being taken in through the hood. Airflow speed can be
adjusted to one of three settings, as follows:
Low
– Mid – High Speed.
TIMER
button, on Control Panel and Remote control, is for operation of
the timing clock. When this feature is in use the unit will automatically
shut-
off after the set time expires. The system’s default timing is
4-hours of operation.
