15
VI. Operation Guidelines
6.3 Source Capture System Controls
TIMER
To set the timer manually, press the TIMER button once for every hour
you wish to run the machine (i.e. press TIMER once for 1-hour of run
time, press TIMER twice for 2-hours of run time, press TIMER three
times for 3-hours of run time, and press TIMER four times for 4-hours of
run time).
If the TIMER button is pressed five (5) times, such that it passes
through the complete timing schedule, it will run continuously until the
unit is manually turned off.
LIGHT
button, on Control Panel and Remote control, turns the LED
Light on and off. When the LED Light is on the symbol above the button
turns green. Pressing the LIGHT button once more will turn off the LED
Light as well as the indicator light.
FILTER CHANGE
indicator light, on Control Panel, begins to flash after
400-hours of operation to indicate that it is time to replace the filter.
Fig. (6) - Control Panel Display
