22
V. Installation Instructions
HA-CMSC-G2-4-W
5.16 Install Extraction Hose Assembly
5.16.1 Pass the LED Cable through the entire length of the Flex Hose, such
that the LED Cable Plug comes out of the end of the Flex Hose, as
shown in Fig. 16.
Fig. (16)
– Assembling Extraction Hose
5.16.2 Align the three-hole Cut-Out pattern on the Inlet Tube Flange with the
three Screw and Washers that are located around the Inlet Port, as
shown in Fig. 17.
5.16.3 Press the Inlet Tube flush against the Face Plate and rotate the Inlet
Tube counterclockwise to fix it in place.
5.16.4 Screw the three (3) Thumb Screws back into the Face Plate to secure
the Inlet Tube to the Face Plate, as shown in Fig. 17.
Fig. (17)
– Connecting Inlet Tube and Face Plate
LED Cable Plug
Inlet Tube
Flange
Screw &
Washer
Thumb
Screw
Cut-Out